Witryna• Imron Elite Basecoat (EY) must be clearcoated. • Imron Elite Basecoat (EY) may be clearcoated wet-on-wet with 8890S™3.5 VOC, 8821S™ 2.1 VOC or EZ-3460S™ 3.5 … http://refinishbg.com/img_products/EN%20IELITE_001.pdf
Did you know?
WitrynaImron Industrial Strength topcoats, High Gloss (GN), Semi Gloss (GO), Satin Gloss (GP) and Flat (GQ), Imron 2.1 HG™, Imron 2.1 SG™, Imron 2.1 ST™, Imron 2.1 FT™ and Imron 3.5 HG™, Imron 3.5 SG™, Imron 3.5 ST™, Imron 3.5 FT™. Imron Industrial Strength Primer may be used over most aged and hard-cured coatings in good … WitrynaThe Axalta logo, Axalta™ , Axalta Coating Systems™ and all products denoted with ™ or ® are trademarks or registered trademarks of Axalta Coating Systems, LLC ...
WitrynaImron Elite Basecoat (EB) may be clearcoated wet-on-wet with 8840S™3.5 VOC, 8821S™ 2.1 VOC or EZ-3460S™ 3.5 VOC Easy Clean clearcoat. Open time of basecoat prior to clearcoat is between wet-on-wet to 16 hours. When clear coating Imron Elite Basecoat, or recoating with itself, sanding is required if the WitrynaImron® 3.5 SG + Semi Gloss (Mix Quality RM), Imron® 3.5 ST + Satin Gloss (Mix Quality RA), Imron® 3.5 FT + Flat (Mix Quality RF): A high solids aliphatic …
WitrynaImron® 3480S™ Clearcoat GENERAL DESCRIPTION A 3.5 lb. /gal (420 g/l) VOC, two-component, polyurethane clearcoat designed for spot, panel and overall repairs. It … WitrynaIMRON® ELITE HDC HEAVY DUTY COATING This Technical Data Sheet supersedes all previous issues. REF IEliteHDC-15 - ANZ - p 3-6 PRODUCT PREPARATION - …
Witrynacoatings. For more protection, Imron ® 2.1 HG-D™ + can also be used over properly primed surfaces in exterior exposures. Recommended primers include: Imron ® 2.8 PR ™, Imron® 2.1 PR ™, Tufcote ® 3.3 PR ™, Tufcote ® 3.5 PR ™, Corlar ® 2.1 PR ™, Corlar® 2.1 PR-P™, and Corlar ® 2.8PR ™. Contact your Performance Coatings
WitrynaApply 1st coat Imron® Traffic. Flash: 3-5 min. Extend 2nd coat Imron® Traffic beyond the previous one. Smoothen out the fade-out area with AK350. OPTIONAL: dilute remaining part Imron® Traffic with 1 part AK350 after 2nd coat and apply 1 coat of this mixture extending in the blending area, before blending in the fade-out area with pure … bkfwarriorsWitryna- Apply 1 coat Imron® Marine epoxy primer (see specific TDS). Bare metals (steel, galvanised steel, aluminium or surface treated aluminium) 1. Clean surface with a … bkf webmailWitrynaImron 3.1 HG-D + can be applied as a DTM over properly prepared: aluminum, hot rolled carbon steel, and weathered galvanized surfaces, in non-corrosive exposures and … bkfservicesWitrynaAXALTA IMRON® AF740™ Imron® AF740™ Polyurethane Clearcoat GENERAL DESCRIPTION A 3.5 VOC compliant, high solids, polyurethane clearcoat designed to deliver high performance, excellent appearance, durability and application as part of the Imron AF700 Basecoat/Clearcoat system. It is formulated to provide balanced … bkfwebserv1/default.aspxWitrynaDescription A 3.5 VOC compliant, high solids, polyurethane topcoat designed to deliver high performance, excellent appearance and durability for propeller and rotary aircraft. … daughter and intiWitrynaImron 3.5 HG-C can be applied over other Axalta industrial coatings including, but not limited to, Imron solventborne polyurethanes, Imron waterborne polyurethane … daughter and husband christmas cardWitrynaDescription A two-component, high-performance, easy-to-use clearcoat designed for overall applications. It delivers a premium appearance with excellent durability and … bkf walnut creek